50w dual output switching power supply rid-50 series www.astrodyne.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458 isolated output universal ac input protections: short circuit / overload / over voltage cooling by free air convection led indicator for power on all using 105c long life electrolytic capacitors model number output volts output amps ripple & noise min load line reg volt tolerance dual output rid-50a 5 volts(dc) 6 amps 80mv pk-pk 0.3 ~ 6amps 0.5% 2.0% 12 volts(dc) 2 amps 120mv pk-pk 0.2 ~ 3amps 1.5% 8.0% rid-50b 5 volts(dc) 4 amps 80mv pk-pk 0.3 ~ 6amps 0.5% 2.0% 24 volts(dc) 1.4 amps 150mv pk-pk 0.2 ~ 2amps 1.5% +8,-4%
50w dual output switching power supply rid-50 series www.astrodyne.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458 input specifications input voltage range 90 ~ 264 vac; 125~373 volts(dc) frequency range 47-63 hz inrush current, typ: (cold start) 33 amps / 230vac input current 1.3 amps. @ 115vac 0.8 amps. @ 230vac leakage current < 2mamps /240vac output specifications voltage and current see selection chart line regulation (note 3) see selection chart load regulation (note 4) 0.5% voltage tolerance (note 2) see selection chart ripple/noise (note 1) see selection chart hold up time @ fl 60ms/230vac 14ms/115vac setup, rise time @ fl 500ms, 20m/230vac 1200ms, 30ms/115vac over voltage protection 5volts only: 5.75 ~ 6.75vdc hiccup mode, auto recover over current protection 110 ~ 150% rated output power hiccup mode, auto recover dc voltage adjust 5volts only: 4.75 ~ 5.5volts(dc) general specifications safety ul60950-1 tuv en60950-1 approved insulation resistance 100m? @ 500vdc/25 c/70%rh emi compliance to en55022b(cispr22b) harmonic current compliance to en61000-3-2,-3 effciency 80% isolation 3000vac input - output 1500vac input - ground 500vac output - ground ems compliance to en61000-4-2,3,4,5,6,8,11; env50204, en55024, en60601-1-2, (en50082-2), heavy industry level, criteria a environmental specifications oper. temperature -25c to +70c (see derate curve) storage temperature -40c to +85c, 10~95% rh relative humidity 20 to +90% rh non cond temperature coeffcient 0.03% / c (0-50c) on +5v output mtbf 172.6 khrs min,mil-hdbk-217f (25c) vibration 10~500hz, 5g10min./1cycle, period for 60min. each along x, y, z axes physical specifications size millimeters 99 x 97 x 36 inches 3.90 x 3.82 x 1.42 weight 14.46 oz (410g) n ote 1. ripple & noise are measured at 20mhz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. tolerance : includes set up tolerance, line regulation and load regula - tion. 3. line regulation is measured from low line to high line at rated load. 4. load regulation is measured from 20% to 100% rated load, and other output at 60% rated load. all specifcations are typical at nominal input, full load, and 25c unless other - wise noted astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.
50w dual output switching power supply rid-50 series www.astrodyne.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
50w dual output switching power supply rid-50 series www.astrodyne.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
|
